Wavecom 89 Instrucciones de operaciones

mA10A10AμHz%AVACVDCMAXMINΩTEMPCAPTEMP True RMS Industrial Multimeter MODEL WAVECOM 89 Wavecom Instruments Pty Ltd 257 Grange Ro

10 Maintenance WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery

11 REPLACING THE FUSES WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the fuse cover. 1. Disc

12 Specifications Function Range Resolution Accuracy DC Voltage 600mV 0.1mV (0.09% reading + 2 digits) 6V 0.001V 60V 0.01V 600V 0.1V 1000V 1V (0.15

13 Function Range Resolution Accuracy Resistance 600 0.1 (0.3% reading + 4 digits) 6k 0.001k 60k 0.01k 600k 0.1k 6M 0.001M 60M 0.01M (0.

14 Enclosure Double molded, waterproof Shock (Drop Test) 6.5 feet (2 meters) Diode Test Test current of 0.9mA maximum, open circuit voltage 2.8V

15

16 Wavecom Instruments Pty Ltd Adelaide 257 Grange Road FINDON SA 5023 Ph: (+61) 08 8243 3500 Fax: (+61) 08 8243 3501 Email: sales@w

2 Introduction This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic), Diode Test, and Co

3 SAFETY INSTRUCTIONS This meter has been designed for safe use, but must be operated with caution. The rules listed below must be carefully followed

4 111VAC6mA10AA453210AμHz%MAXMIN87109VDCTEMPΩCAPControls and Jacks 1. 6,000 count LCD display 2. RANGE button 3. Hz and % button 4. Mode button

5 Operating Instructions WARNING: Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great

6 DC CURRENT MEASUREMENTS CAUTION: Do not make 20A current measurements for longer than 30 seconds. Exceeding 30 seconds may cause damage to the met

7 RESISTANCE MEASUREMENTS WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before taking any re

8 TEMPERATURE MEASUREMENTS 1. Set the function switch to the Temp position. 2. Insert the Temperature Probe into the input jacks, making sure to obse

9 AUTORANGING/MANUAL RANGE SELECTION When the meter is first turned on, it automatically goes into Autoranging. This automatically selects the best r