Wavecom G900 Manual de usuario descargar pdf (Pagina 52)

Wavecom GSM Modem

This confidential document is the property of WAVECOM and may not be copied or circulated without permission

9. Failure result codes

9.1. Report Mobile Equipement errors +CMEE

This command disables or enables the use of result code

+CME ERROR : <xxx> or +CMS ERROR :<xxx>

Application to GSM AT+CMEE=0 disable « +CME ERROR : <xxx> »

and use « ERROR » instead

GSM to application OK

Application to GSM AT+CMEE=1 enable « +CME ERROR : <xxx> »

GSM to application OK

9.2. Extended error report +CEER

If the last call setup (originating or answering) fails, this command gives

the reason of the call release.

Application to GSM ATD123456789 ; outgoing voice call

GSM to application NO CARRIER

Application to GSM AT+CEER ask for reason of release

GSM to application +CEER : Error <xxx>

<xxx> is the cause information

element values from GSM

recommandation 04.08

The cause information element from GSM 04.08 is given below.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 66 67

Sin comentarios

Wavecom G900 Manual de usuario Pagina 52